Home > Airgun Parts >

Archer Airguns 13/22 SuperSear for Crosman Air Pistols
Improved trigger sear for Crosman 1377 and 2240 air pistols 1322 2250 1750 pc77 backpacker bugout kit pumpmaster classic. crossman
 
Our Price: $19.99


Availability:: Usually Ships in 2 to 3 Business Days
Product Code: 1322SUPERSEAR
Qty:

Description
 
It's back! The 13/22 SuperSear is a simple drop-in replacement for the Crosman factory sear that provides greatly improved trigger characteristics in Crosman 1377 and 2240 type air pistols. And as we all know, improved trigger performance translates into improved accuracy downrange when shooting!

Compared to the factory sear, the 13/22 SuperSear provides a clear two-stage trigger pull with a well-defined second stage let-off. The 13/22 SuperSear also gives a lighter and more consistent, predictable trigger pull.

Testing at Archer Airguns showed a reduction in pull weight of 30% compared to the factory sear, together with a 10% reduction in spread of trigger pull weights during a 10-shot string.

Yet these improvements require no complicated adjustments to achieve. The 13/22 SuperSear is a genuine drop-in replacement. Just remove the right trigger grip and trigger side plate to fit. Detailed installation instructions are supplied with the kit.

The 13/22 SuperSear also fits all 2300 models, although the sear spring may require adjusting to a heavier preload for a safe trigger weight.

Designed and manufactured especially for Archer Airguns by the noted airgun innovator and engineer, Steve_in_NC.

The 13/22 SuperSear is precision CNC-manufactured from high quality Aluminum with alloy steel, load-bearing, wear-resistant, precision machined pins. (Note that the compression marks visible on the surface are a result of the manufacturing process and are have no effect on performance). Itís supplied complete with three stainless steel washers that fit on either side of the sear and trigger pins - one is already included in the gun - and reduce the unpleasant side-to-side slop of the factory trigger mechanism.

The 13/22 SuperSear fits 1377, 1322, 2240 and PC77 Pumpmaster Classic air pistols. It also fits the Crosman Backpacker Bugout Kit, older versions of the 1377 and 2240 and similar models such as the 1789 and 2289. The SuperSear does NOT fit the first variant 1377 and 1322 pistols with steel breeches that were manufactured between 1977 and 1981.

NOTE. The 13/22 SuperSear is designed for use with the standard factory trigger assembly. We strongly recommend that installation is followed by a very careful safety check before the gun is used for shooting.

If the 13/22 SuperSear is added to a trigger mechanism thatís already been modified, itís not always possible to predict the outcome - especially if a substitute (lighter and/or shorter) sear spring is installed. We strongly suggest that you you use the standard factory sear spring to avoid the possibility of the trigger becoming too light and, hence, dangerous or failing to cock correctly.

Average Customer Review: 5 of 5 Total Reviews: 7 Write a review:

  1 of 1 people found the following review helpful:
 
Trigger modification February 9, 2016
Reviewer: South Jersey Jim from Williamstown, NJ United States  
Got the mod kit in two days....installation not a problem, but be careful with the small ball and spring on the trigger safety bar....easy to pop out of place and a bear to get back in.   Makes my 2240 a really great shooting pistol....thanks Archer!

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
SuperSear February 9, 2015
Reviewer: Stubby from Upstate, NY United States  
The best trigger job you can get for the money. Installation was a snap. So easy, a Caveman can do it!  Great job Stephen.
Fast and very friendly service.
I'll be back...........Stubby
                          Upstate, NY.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Works great but may need a little tweaking August 20, 2014
Reviewer: Jim from Houston  
I installed this on a 1322. During the checkout of the upgrade I found that the bolt would not latch back consistently. As another reviewer mentioned, it is the washers. They are too thick to use one on each side of the sear. I wanted to use both, so I shaved a few millimeters off of thickness of each washer going from 62mm down to 57mm. The bolt latches back consistently now and the trigger pull is 2-1/2 pounds. Great mod!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Excellent for older Crosman 22xx pistols August 19, 2014
Reviewer: Brad from Ohio  
Greetings-  we own four (4) Crosman 22xx pistols.  Two of them have the older 2 screw trigger frame/trigger set-up and the other two have the new version.

We ordered these sears to correct the heavy tigger pull of the older, 2 screw, set up.  Installed, our trigger pull on both of these pistols has been reduced to 3 lbs.  Also, there is no creep or grittiness. These sears do not provide a 2 stage trigger, though.  What one ends up with is called a roll trigger.  Very smooth.  Easy to learn, but a roll trigger.   Interestingly, the trigger on the two older pistols is now very similar to that of the newer ones with the three screw set-up.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great mod!! September 30, 2013
Reviewer: Anonymous Person from WI  
This was one of the first modifications I ordered for my new Crosman PC77 and it made a huge improvement with the trigger feel, along helping eliminate all the side to side trigger slop. However, I did have some issues with cocking after installing the washers to shim the new sear. And I ended up needing to remove them to eliminate the inconsistent latching of the hammer.

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Airgun Parts
Airgun Parts > Crosman 1377 Parts
Airgun Parts > Crosman 2240 Parts