Home > Airgun Parts >

Archer Airguns Tank Block Kit (Crosman 2240)
Archer Airguns parts kit for Crosman 2240, 1740, 2250 and 1750 CO2 air pistols.
Our Price: $36.99

Availability:: Usually Ships in 2 to 3 Business Days

Description Technical Specs
The Archer Airguns Tank Block can be used to attach a paintball tank to a Crosman 2240, 1740, 2250 or 1750 air pistol. This conversion does require some engineering skill and experience, however, as the gas tube of the Crosman pistol must be drilled for the fixing screws. This blog post by Barry from the Villages in Florida shows an example of the results that can be obtained.

This kit comprises the machined Aluminum block­ to which the paintball tank attaches. It fits into the end of the gas tube, replacing the tube cap. This is a Shanghai Airguns factory stock part, designed for the QB79 air rifle, but it also fits the Crosman 2240 and similar CO2 air pistols. It's supplied together with the accompanying O rings, screws and lock washers.

Note that this part is the desirable "OLD MODEL" part with 2 O ring slots. It is designed and manufactured for use with CO2 at pressures of up to 1100psi. It is NOT suitable for use with high pressure air (HPA) conversions using higher pressures. A dangerous accident may result if this tank block kit is used outside of its capabilities.

Average Customer Review: 3 of 5 Total Reviews: 1 Write a review:

  0 of 0 people found the following review helpful:
Solid unit, but not all you need August 31, 2016
Reviewer: Adam Wentworth from Massachusetts  
You will need an open bolt face specifically designed for bulk fill to use this on your 2240. The stock bolt has the piercing pin in it so all the pressure just goes around the valve. If installed properly this doesn't move around at all and supports the weight of a small tank.

Was this review helpful to you?

Browse for more products in the same category as this item:

Airgun Parts
Airgun Parts > Crosman 2240 Parts